Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - hardwire

Pages: [1] 2
1
Beta Testing / Re: v3.73 - Improved Canadian Topos!
« on: March 11, 2009, 04:14:44 PM »
No, I'm still running XP SP3..


2
Beta Testing / Re: v3.73 - Improved Canadian Topos!
« on: March 11, 2009, 04:05:34 PM »
Ok, sorry..   :( 

My bad.. I had not restarted after the install ... I restarted it and everything acted correctly...   :) 

3
Beta Testing / Re: v3.73 - Improved Canadian Topos!
« on: March 11, 2009, 03:48:00 PM »
Couple of minor "odd" things..   :)

Clicking on the hand to move the map, works except the icon is the magnifying glass instead of the hand icon... and the right mouse click menu always choses the same waypoint even though I'm no where near...  :)

4
User Projects / GPS Playback + Helmet cam footage
« on: January 06, 2009, 04:49:47 PM »
That is COOL! '<img'>

5
Beta Testing / V3.63 photofusion feature
« on: January 02, 2009, 10:31:54 AM »
You got it. Works great!  

Thanks !

Ps like the new splash    '<img'>

6
Beta Testing / V3.63 photofusion feature
« on: January 01, 2009, 11:19:01 AM »
I forgot to say that it does successfully launch a new session with the photo in my default photo viewer software before it locks up.

7
Beta Testing / V3.63 photofusion feature
« on: January 01, 2009, 11:02:47 AM »
With latest beta, I added photos to a track as waypoints. Turn photo toggle on and little photos display fine. When I mouse over the photos they expand then contract as expected just fine. But..  '<img'>  When I click on the photo, it expands to the larger photo. When I mouse off the larger photo it contracts to smaller photo then Topofusion acts like it is busy and does not respond to anything. The cursor icon looks like a hand for moving. Looking at the task manager it shows topofusion using CPU cycles. Hope that helps..  '<img'>

8
Feature Requests / 3D to 2D terrain topo
« on: May 06, 2008, 06:08:48 PM »
Just a thought..   '<img'>  
I use topofusion 3D alot when I am planning a hiking trip, but I find myself going over to maps.google.com to print the terrain option they have showing the topo gradiants with the relief shading for the map to take along.

I'll bet with all of your skills that you already have building the 3D view with DEM data, it would be the same knowledge needed to flatten the view back to 2D "terrain" with shading and clean topo gradiants...  

maybe??

9
Beta Testing / Beta 3.25 testing
« on: March 06, 2008, 06:14:34 PM »
LOL  ':laugh:'

No problem! New version works great!

Thanks!

10
Beta Testing / Beta 3.25 testing
« on: March 06, 2008, 05:17:33 PM »
Not good news..  still have the same error..

I cleared my cache to make sure I got the new version, I deleted the ini and map caches to start fresh.. I re-installed the 'released' version 3.23, then install the Beta but still same error...

I am emailing the size of the exe I downloaded to make sure I got the good one, and the INI and LOG and pic of the error to the support email.

11
Beta Testing / Beta 3.25 testing
« on: March 05, 2008, 05:28:09 PM »
INI sent to support email address...

Not sure if this helps...

But, I deleted the INI, entered my registration information and it failed with the same error....

12
Beta Testing / Beta 3.25 testing
« on: March 05, 2008, 01:45:08 PM »
When I change the Options/3D settings/ Multiply Texture Size slider to any other value besides the start up vlaue, I get an error message box indicating Runtime Error 383, 'Text' property is read only.

 '<img'>

13
Beta Testing / Beta v3.21 - more fusion in your TopoFusion
« on: January 28, 2008, 06:17:26 PM »
Boy, I like the new combos! '<img'>
tiger/aerial and tiger/urban make planning real nice!
Thanks for the upgrades!

14
Beta Testing / Version 3.09 - More import/export options
« on: June 06, 2007, 07:06:57 PM »
COOL! Works great! I really like the waypoint icons! That trail is my favorite for backpack training also.

15
Beta Testing / Version 3.09 - More import/export options
« on: June 04, 2007, 05:03:44 PM »
Thanks for your wonderful product and your support!!

16
Beta Testing / Version 3.09 - More import/export options
« on: June 04, 2007, 03:54:29 PM »
I tried your new import KML function and it seems to work for the track, but the waypoints seem to cause it problems. It seems to know where the waypoint is, but draws a line somewhere outside the USA.
Here is my KML file.
I nearly always have waypoints with my tracks.

17
TopoFusion Anouncements / Terraserver Back up
« on: June 03, 2007, 06:25:18 AM »
Boy, I hope this does not mean some thing serious.... it is a long time...   '<img'>

18
Beta Testing / v2.991 - 3D not working
« on: January 18, 2007, 07:55:04 PM »
No problem, works great!  

Been there, done that...  '<img'>

19
Beta Testing / v2.991 - 3D not working
« on: January 18, 2007, 06:28:27 PM »
This version displays the creating 3d message then nothing. I switched back to v2.99 to make sure it was not connection problems, and 3D display works fine..

20
Beta Testing / User maps - vanish in arial/topo
« on: January 18, 2007, 04:40:01 PM »
Yup, it is fixed. Thanks!

Hope you had a nice trip! '<img'>

21
Beta Testing / User maps - vanish in arial/topo
« on: January 11, 2007, 07:28:27 PM »
More testing and it looks like the issue relates to where Topofusion starts up at. If I scroll the map to the other state where user maps are, then they are invisible. But if I shut down topofusion then restart at the new location the user maps show up as expected. If I scroll the map back to the first maps, then it is invisible. But if I switch to landsat maps I can scroll between the states and all the maps are visible and work as expected.... Hope that helps...  '<img'>

22
Beta Testing / User maps - vanish in arial/topo
« on: January 11, 2007, 07:14:14 PM »
Using beta 2.99, and have started adding multiple user maps. GREAT Feature! But I have noticed the first one I added no longer displays  on the arial and topo maps but will still show on the landsat. The other three usermaps work as expected. If I reset the calibration it shows up. I don't think it is user error... '<img'>

23
Beta Testing / Beta 2.984 - User  Maps
« on: December 21, 2006, 08:11:52 PM »
COOL! That works pretty good!
 '<img'>

24
Beta Testing / TopoFusion Direct3D - 2.98
« on: October 17, 2006, 04:39:25 PM »
I loaded directx 9 from microsoft, then loaded the beta and it is working fine. I'm using a Sony Vaio.

25
Beta Testing / Font setting for new City name overlay
« on: September 23, 2006, 08:03:34 AM »
Ahhh yes, mucho better! These old eyes can read that just fine..    '<img'>

AS always THANKS!

26
Beta Testing / Font setting for new City name overlay
« on: September 22, 2006, 02:07:08 PM »
The bottom right is very readable.

Here is a snap shot.

27
Beta Testing / Font setting for new City name overlay
« on: September 22, 2006, 11:49:02 AM »
Just a small input, but the FONT used for the new city names look like don't have enough spacing between the letters and are on top of each other. I tried to find an option to change the font but didn;t find anything...

Thanks for continue to improve!

28
Beta Testing / Tracks auto merged now??
« on: June 28, 2006, 03:38:32 PM »
Thanks! the new beta works MUCH better ..   '<img'>

29
Beta Testing / Tracks auto merged now??
« on: April 21, 2006, 05:30:17 AM »
I had multiple tracks in my active log in a GPSmap 60C and when I downloaded it combined them all?? I did download the tracks into mapsource and they did come down as separate tracks as normal. Was there a change in that area??

Thanks!

30
Archived - Feedback and Comments / Topofusion: Distance readout for "Draw Track"
« on: April 10, 2006, 05:44:37 PM »
It should show distance in the lower left corner where the messages are, as you draw the line.

31
Archived Support / 3D server down ??
« on: March 19, 2006, 05:34:35 PM »
No problem. Thanks for responding!

32
Archived Support / 3D server down ??
« on: March 19, 2006, 05:23:04 PM »
The 3D continues to time out. I assume it is still down for 2 day '<img'>?

33
Archived Support / aerial photo
« on: February 14, 2006, 09:08:06 PM »
Cool, maybe a user map layer that can be partially transparent with one of the other layers to make it easier to get registered???  Maybe a similar implementaion as "COMBO" but with a user map  '<img'>

34
Beta Testing / beta 2.77
« on: January 08, 2006, 07:50:33 PM »
It downloads waypoints just fine. Thanks for fixing so quickly!
 '<img'>

35
Beta Testing / beta 2.77
« on: January 08, 2006, 06:54:42 AM »
The waypoint created only in the backup directory and the track download created in the correct directory. I have emailed more details and the logs from the test to your support email. It looks like the waypoint download is getting an exception at the end of the download.
Thanks!

36
Beta Testing / beta 2.77
« on: January 07, 2006, 02:26:50 PM »
When I download waypoints from GPS, it seems to have the same problem that tracks did in previous beta. It only saves them in the back up directory.

I like the nudge!

37
Beta Testing / v2.65 GOTO option
« on: July 25, 2005, 04:16:27 PM »
Thanks! Works great!   '<img'>

38
Archived - Feedback and Comments / WayPoint Symbol Properties
« on: June 25, 2005, 04:01:28 PM »
When/If you add the option to display images for the symbols on the maps, I was wondering if you could consider adding the information in the TOPOFUSION.INI as a section, so we might add additional symbols and maybe bigger images..

Maybe like:

[Settings]
SymbolsDirectory=C:\Program Files\TopoFusion\Symbols

[Symbols]
Default=Default.bmp
Residence=Residence.bmp
Trailhead=Trailhead.bmp
Geocache=BigGeocache.bmp
GoodEating=Hamburger.bmp

and so on....
Then you can use this section to population the drop down list box in the Waypoint Properties box...

 '<img'>

Just an idea... Thanks!!

39
Archived - Feedback and Comments / Waypoint Properties
« on: June 11, 2005, 06:13:59 PM »
Thanks!

40
Archived - Feedback and Comments / Waypoint Properties
« on: June 11, 2005, 05:18:54 PM »
It would be nice if there was a "button" beside the URL property that would launch a browser window with that URL. It would save the COPY/PASTE into a Browser window...   '<img'>

Thanks!

41
Archived Support / Change wpts to compass degrees
« on: May 25, 2005, 06:49:13 PM »
The project waypoint is the one that is on the GPS.... I was thinking you could project the other three corners, then upload the waypoints to TopoFusion to put on the topo map.. '<img'>

42
Archived Support / Change wpts to compass degrees
« on: May 25, 2005, 05:30:54 PM »
I apologize for jumping in but can't you use the "project waypoint" that uses degrees and distance to create a 2nd waypoint from the first waypoint??? '<img'>

43
Archived Support / Access Violation-Make Network
« on: May 02, 2005, 05:10:23 PM »
Gosh, no problem....   '<img'>  I wish I was out there!   Wonderful tool!

44
Archived Support / Access Violation-Make Network
« on: May 01, 2005, 10:37:13 AM »
Hmmm I may have discovered a repeatably problem...  '<img'> Looks like it is related to the first few track points.... This first picture gets the error...

and when I move the first point down so it does  not cross the trail like this...

It makes a network just fine without a problem....
It seems to be related to just the beginning of the trail.... Because, and don't laugh  ':p'  SInce I was having problems locating this cache, I went in circles a few times ... this one one makes a network just fine...

45
Archived Support / Access Violation-Make Network
« on: April 26, 2005, 06:58:39 PM »
This evening I went back to my old tracks to make sure I was not dreaming and all of them work fine ... '<img'> So it sounds like it is not the version.... '<img'>

46
Archived Support / Access Violation-Make Network
« on: April 25, 2005, 06:05:12 PM »
I know I have done this fine on previous versions. But.... I have made 3 tracks in an area and wanted to use the MAKE A NETWORK option. It runs then errors about halfway with the following error...


I have tried using each of them individually but it get the same error??
LOG:
TopoFusion 2.50 Log Begin
Windows Major Version: 5
Windows Minor Version: 1
Windows Build Number : 2600
Windows Platform ID  : 2
<snip>
recreateVideoMemoryPool: Finishing up

Caught Exception:
 Function: ManagerThread (Network)
 Exception: Access Violation

47
Beta Testing / Thanks beta testers, and v2.50
« on: February 22, 2005, 04:17:36 PM »
I can hardly wait !  '<img'>

Thanks

48
Archived - Feedback and Comments / Installing v.2.5
« on: February 21, 2005, 07:53:35 PM »
Did the 2.5 upgrade and all went well with no problems. '<img'>  I was at 2.19 when I did it..

49
Archived - Feedback and Comments / Feature requests
« on: February 20, 2005, 01:58:54 PM »
'<img'>  I REALLY like the beta feature that uses an auto-generated name for the track that is downloaded using the  track date. Just a minor request to include the time would be helpful, like maybe the hour at least... I do multiple tracks per day.. CORRECTION==> I must have missed it but looks like 2.5 allows the label to display the waypoint symbols name which solves my request! No need for changing the background color of the waypoint label to a different color for the found caches... Thanks again for your good work!

50
Archived Support / GPSmap 60C waypoints won't download
« on: February 16, 2005, 02:35:49 PM »
Bingo! Works like a charm!!  

THANKS for the wonderful tool !

 '<img'>

Pages: [1] 2