Topics

1

Beta Testing / USGS Imagery

« on: January 01, 2019, 04:36:55 PM »

Hello Scott,
Happy New Year to Everyone.
I noticed a couple days ago the USGS Imagery tiles do not download in many places.
Again, I'm in the Patagonia area, AZ.
Thanks
Roger

2

TopoFusion Pro / Color Aerial vs USGS Imagery

« on: November 15, 2017, 02:52:52 PM »

Hello,
The attachment shows a section of today's tile download. (Just NW of Mowry mine )
The current downloads look like the Color Aerial Tiles.
They do not look like the USGS Imagery.
Is the key "U" taking us to the Color Aerial Server?
Thanks,
Roger

3

TopoFusion Pro / USGS Imagery Follow Up

« on: January 28, 2017, 07:53:34 AM »

Hello,
It has been 10 days since last post about USGS Imagery.
I'm using Pro V 5.40
USGS Imagery is still not downloading tiles.
The message is is "No Map Available"
I'm right over the Nogales, AZ airport, so I know there is a map available.
Any info Scott?
Thanks,
Roger

4

TopoFusion Pro / USGS Imagery

« on: January 17, 2017, 09:52:51 AM »

Hello,
I'm using Beta 5.39
USGS Imagery is not downloading tiles.
In fact the msg is "No Map Available"
I'm right over the Nogales, AZ airport, so I know there is a map available.
I opened TopoFusion on a different computer running version 5.32 and get the same msg at the same location.
Thanks,
Roger

5

Beta Testing / Beta 5.39 & USGS Imagery

« on: January 17, 2017, 09:51:28 AM »

Hello,
I just installed Beta 5.39
This is probably a coincidence but USGS Imagery is not downloading tiles.
In fact the msg is "No Map Available"
I'm right over the Nogales, AZ airport, so I know there is a map available.
I opened TopoFusion on a different computer running version 5.32 and get the same msg at the same location.
Thanks,
Roger

6

TopoFusion Pro / USGS Imagery

« on: July 20, 2016, 03:26:44 PM »

Hello,
USGS Imagery is now giving me "No Map Available"
Presently I'm trying to download tiles for Tubac and get this msg.
I get the same msg in the Ruby area.
But it is occurring all over Santa Cruz County.
It's 3:30 PM July 20th.
Thanks,
Roger

7

TopoFusion Pro / USGS Imagery

« on: July 10, 2016, 03:41:03 PM »

Hello,
Today is Sunday July 10th.
Is the USGS Imagery server down today?
I'm getting "No Map Available" when trying to down load some tiles.
Thanks,
Roger

8

TopoFusion Pro / USGS Aerials

« on: April 28, 2015, 09:10:29 AM »

Hello Scott,
I'm getting black/blank tiles from the USGS aerials (U) but not everywhere, just in one location so far.
Go to 31 47 40 N  /  110 44 55 W. It is the Madera Canyon region in Green Valley AZ.
Move around you you'll see what I mean. I'm not sure but it appears that a horizontal band of tiles are missing.
Thanks,
Roger

9

TopoFusion Pro / USGS Imagery

« on: March 03, 2015, 04:25:34 PM »

March 3rd 1630
Hello,
USGS Imagery is not working.
It is downloading black/white checker board patterns.
Roger

10

TopoFusion Pro / USGS Imagery (Aerail)

« on: January 20, 2015, 02:53:39 PM »

Hello Scott,
Jan 23th 2015..1500
USGS Imagery (Aerials) U are not downloading.
I have an internet connect.
Other downloads work.
Thanks,
Roger

11

TopoFusion Pro / Decrease Brightness

« on: March 19, 2014, 09:24:39 AM »

Hello,
I thoroughly searched the options before asking this question, including the combo options.
I would like to decrease the brightness on some of my open aerial maps.
I can I do this?
Thanks,
Roger

12

Beta Testing / Export Blurred-Correct Capture

« on: December 26, 2013, 09:14:15 AM »

Hello,
In my previous post I attached the wrong file.
This attachment shows how the Window is blurred after doing an export.
This attachment is the previous attachment after being blurred.
Thanks,
Roger

13

Beta Testing / Export Blurs Window

« on: December 26, 2013, 08:19:12 AM »

Hello,
I'm using beta 4.85 and XP.
After exporting, when I close the export window/tool, it blurs what I exported and I need to close/restart TopoFusion.
Thanks,
Roger

14

Feature Requests / 3-D tools

« on: November 04, 2013, 11:50:24 AM »

Hello,
Would like to see the ability to draw a track on a 3-D view and be able to print a 3-D view.
Thanks,
Roger

15

Beta Testing / Beta 7.6-Shaded Relief

« on: April 17, 2013, 06:32:11 AM »

Hello,
I'm using Beta 7.6
I'm unable to turn off Shaded Relief.
Closing and opening the windows resets button to "Turn on Shaded Relief".
But the the Shaded Relief is already on.
How can I turn off the Shaded Relief?
Thanks,
Roger

16

TopoFusion Pro / Open Aerial "Map Not Available"

« on: January 08, 2013, 04:43:39 PM »

Hello Scott,
Just an FYI.
As you know I live in Southern, AZ.
I noticed today that some open aerial tiles are not down loading when zoomed to a higher resolution.
Several would download then a missing tile or two.
Getting msg "Map not Available". There was a similar problem before.
The areas I noticed today were around Mt Hopkins and Mt Wrightson. In fact the Observatory is completely blank.
Also Area around elephant head, and parts of Gradner Canyon have missing tiles.
Roger
Thanks for considering adding the ability to draw in 3D

17

Feature Requests / 3 D Views

« on: January 04, 2013, 09:58:46 AM »

It would be nice to be able to draw a track in the 3 D View.
It would make it easier to plan a route between peaks rather than over them.
I know contour lines can be used, but in an aerial view the ability to draw a track would be helpful.

18

TopoFusion Pro / Open Aerial

« on: April 25, 2012, 04:04:54 PM »

Hello Scott,
Having problems again today downloading open aerial tiles. It appears to be related to zooming in/out.
If I zoom out to a very small area the tiles download, as I start zooming in the download will stop.
The colored aerial and My Topo download new tiles with no problem.
I'm looking at an area about 9 mi SE of Patagonia around these coordinates:
31.31.40 N  110.36.38 W
Thanks,
Roger

19

TopoFusion Pro / Open aerial

« on: April 23, 2012, 06:07:18 AM »

April 23,2012
Hello,
I'm in southern AZ and the "Open Aerial" tiles are not downloading.
I read the pop up message.
I have a good internet connection.
Thanks,
Roger

20

Feature Requests / Aerial Maps

« on: February 01, 2012, 06:12:37 AM »

Hello Scott,
Is it possible to incorporate Bing Colored Aerial Maps into TopoFusion?
They have great detail and depth of field.
Thanks,
Roger

21

TopoFusion Pro / Open Aerial

« on: October 13, 2011, 04:17:17 PM »

Hello,
I installed Beta 4.30 today.
When  using Open Aerial tileset,  I am getting many tiles with the "unable to display map for this location and tileset. The map may not exist, or you may need to pan the map to this UTM zone.
They are mixed in with tiles that display properly.
No other tileset seems to have this problem.
I'm looking at southern, AZ around Patagonia.
Thanks Roger

22

Beta Testing / Beta 4.06 Error Msg

« on: December 31, 2010, 06:36:49 AM »

Hello Scott,
I got the following error after installing beta 4.06. My Operating System is XP.
Module:frmMain
Procedure:Form_Resize
Line Number:0
Error Number:308
Description:Invalid Property Value.
Is there a fix I can use?
Thanks,
Roger

23

TopoFusion Pro / Problem with Large Colored Aerials

« on: September 06, 2010, 03:51:49 PM »

Hello,
I am having a problem downloading large Colored Aerial Tiles. The drop down menu shows the largest size as 0.003.This is the size that I am having problems with. It seems to be arbitrary, "hit or miss" in some areas.
The area that is giving me problems is East of Highway 82, between Nogales and Patagonia, AZ and areas in the Patagonia Mts. These are first time downloads on a new computer running Windows 7.( I haven't tried other areas.) All the other Colored Aerial sizes are downloading fine, along with the new My Topo maps. Occasionally in the B&W aerial tiles, one out of many doesn't download.
Any suggestions?
Thanks,
Roger Marquette

24

Beta Testing / Street View

« on: June 01, 2010, 11:04:16 AM »

Hello,
With V 3.974, when I open TopoFusion it defaulted to the Street View even if I closed the application in the (M) My Topo View.
It was easy enough to switch views.
Roger

25

GPS, Trails, Training / Live Tracking

« on: November 22, 2009, 07:55:14 AM »

Live Tracking.
Hello,
I've started using an Acer Aspire with Topofusion's live tracking feature. They work Great together.
My unit prefererence for Lat/Log in Topofusion are set for Degree, Minutes, Seconds. Is there a way to set the Lat/Long coordinates in Live Tracking to Degree, Minutes, Seconds? It seems to default to Decimal Minutes.
Thanks,
Roger Marquette

26

TopoFusion Pro / Verison 3.90 and Colored Aerials.

« on: October 15, 2009, 03:34:50 PM »

Hello Scott,
I just read your notes in the forum and upgraded to V 3.90 but it did not fix my problem:
roger
I am using Beta V 3.88.
I started getting the following error msg today when using colored aerials.
“Unable to display map for this location and tile set. Topo/Aerial maps cannot be displayed across UTM zones.”
I’ve never seen this before.
Help…Please.
Thanks,
Roger

27

TopoFusion Pro / Live Tracking

« on: December 08, 2008, 02:15:54 PM »

Hello,
Are there instructions for "Live Tracking" in the User Manual?
If not, can anyone suggest where I could find "Live Tracking" instructions?
I am going to purchase an Acer computer and wanted to try live tracking on my Garmin map 60Csx
Thanks,
Roger Marquette