TopoFusion support forums

TopoFusion Support => TopoFusion Pro => Topic started by: davehunt00 on July 19, 2020, 03:33:28 PM

Title: UTM values getting switched when setting waypoint
Post by: davehunt00 on July 19, 2020, 03:33:28 PM

When saving a waypoint, the UTM easting and northing values are being swapped.

I have TopoFusion Pro set to US Topo
Options / Preferences / Units / Coordinate type = UTM, Datum selection = WGS 84

Zoom to someplace like Delta Utah
Click the waypoint flag icon in the toolbar
Click on Delta
>> the Add Waypoint dialog comes up
   set File to add waypoint to: New File
   set Name to "test point"
   note UTM Coordinates are something close to "0363783.35 4357407.49" and UTM Zone = 12
   click OK
   >> file dialog appears
       set name to "waypt test"
       click Save
In the file list below the map, double click on the new file
**Welcome to Colombia...

Right click on the waypoint / Edit waypoint
** notice the UTM Coordinates are now: 4357407.49 0363783.35

Neat workaround: edit one of the UTM decimals, click OK
Double click the file again
**Back to Utah...

Appears the easting and northing are being reversed on Add Waypoint save

Thanks!
D

Title: Re: UTM values getting switched when setting waypoint
Post by: ScottMorris on July 19, 2020, 06:16:11 PM

Hi Dave,

Thanks for the post.  Hello Columbia indeed!

This issue was fixed in v5.71 -- update and let me know if you notice anything else amiss!

Scott

Title: Re: UTM values getting switched when setting waypoint
Post by: davehunt00 on July 19, 2020, 08:46:07 PM

It is indeed.  Thanks!